TY - JOUR AU - Ă–zbek, Y.Y. AU - Durman, M. PY - 2013/03/04 Y2 - 2024/03/29 TI - Wear Properties of AISI 4140 Steels Modificated By Using Pulse Plasma Technique JF - International Conference on Plasma Surface Engineering JA - PSE VL - 2 IS - 13 SE - Poster: Tribological coatings DO - 10.3384/wcc2.287-290 UR - https://wcc.ep.liu.se/index.php/PSE/article/view/451 SP - 287-290 AB - In this study, the microstructure and wear properties of pulse plasma treated AISI 4140 steel was investigated. The surfaces of the samples were modified by using plasma pulse technique. The only one battery capacities (800mF) and two different sample plasma gun nozzle distances of 50mm, 60mm, 70mm, 80mm and different number of pulse were chosen for surface modification. XRD analyses were done for all samples. Wear test was done in CSM-linear wear test machine with 0.15 m/s constant sliding speed under 5N, 7N, and 9N loads for 200 m. It was observed that friction coefficient and wear value were changed in accordance with load. Friction coefficient values of modified specimens were lower than that of non-modified ones. Wear resistance was increased in modified samples. Worn surfaces of specimens were studied by SEM, EDS analyses techniques. Modification layer was formed on surface (in Fig.1a). ER -